to the engines and auxiliary equipment is good, and the optional generator is positioned aft. Fuel is carried in aluminum tanks outboard of the engines. Bronze raw-water strainers and sea valves are standard, and system ... 's willingness to invest in engineering and technology. The 3500 was designed with a state-of-the-art computer ...

commissioned marine engineer Jim Wynne to design the boat, which proved so successful Aronow launched Formula ... engine controls (Kiekhaefer controls are standard with MerCruiser power) have integral drive trim control ... of the cockpit. Aluminum tanks outboard of the engines carry 238 gallons of fuel, and Thunderbird's data suggests ...

3406Es, the only engines offered. In a light chop, we had a top speed of 31.6 knots. Cruising at 2050 ... the accommodations space. The engineroom is a bit tight, and the condensing units are outboard of the engines ... . Smaller open designs have a bridge deck that can be raised for engine access, but the 5000's is sealed ...

's product-development-and-engineering team, which resides next door to the plant. This is the standard ... -controlled mill. The first boat produced is given to Sea Ray's test engineers, who essentially get paid to break ... ahead. The 550 responded instantly, and with a touch of the bowthruster, a bit of helm and engine work ...

engine package offered in terms of horsepower. Even so, at more than half-load with six people aboard ... have fallen a bit short. This is no longer the case, thanks to a high-gloss Awlgrip finish. Engines ... access to both. Engine removal hatches are in the saloon sole, and machinery removal hatches ...

. As is typical from Viking, the 61's engines are mounted on steel I-beams that span the engineroom and are fastened to the bulkheads, in an effort to transmit engine weight and thrust more evenly to the hull ... shield is standard, positioned abaft the engines. An additional 20kW generator can be added, and I ...

, engineered the structure and managed weights and balance." Lizza conducted the sea trial on hull number one ... of the engines. A 17.5 kW Onan generator in a sound shield is positioned abaft of the engines. While the 54's ...

mismatched with seasoned hull tooling, is one of a series of new hulls designed and engineered for Mc ... , and access on centerline and outboard of the engines is good. Machinery removal hatches are provided ... designs keep service personnel off the phone and on task. Hydraulic pumps on both main engines provide ...

Campbell paired a jet engine with a boat and set a world speed record in 1957, the English have ... English boatbuilders. A 13.5kW generator in a sound shield is aft in the lazarette, and main engine ... of the low overhead and the aluminum fuel tanks, which are positioned outboard of the engines. Additional ...

station on the flying bridge has enough space for the usual engine instrumentation, as well ... -mount wheel shadows the engine controls. A single-lever setup might be more desirable. I would also pass ... and pasted in the sales office and faxed to Horizon's engineering team for a reality check. When all ...

when major work is needed. There is good access to the inboard side of the engines, and separate hatches provide access to the expansion tanks. Access outboard of the engines is limited by the aluminum fuel tankage, but a section of the saloon sole above the engines can be removed. The lazarette area ...