adds drag and reduces efficiency. Ergo, the 310’s size is perfect for a twin-engine application ... engine-monitoring system. Sound levels were measured at the helm. RPM    Knots    GPH    dB(A) 600 ... ) FUEL: 260 gal. WATER: 20 gal. TRANSOM DEADRISE: 24 degrees ENGINE OPTION: 2 x 250 hp Yamaha 4 ...

engineer. “Dad idolized Uncle Tommy but it bugged him that Tommy would never run the boats — Dad did all ... with gas engines and ran about 18 knots. Whiticar’s most recent builds are state-of-the-art tournament ... knew how much time we spend making engine rooms pretty — he’d think we were wasting the customer ...

of The Mechanical Engineer’s Manual — the bible of the breed. Huckins credited Marks with teaching him the skills ... with a pair of 125-horsepower gasoline engines. Huckins skippered his new boat to New England ... . Engines were mounted on I-beams supported by the engine room bulkheads, and Huckins experimented ...

Angel, vice president of product development and engineering. “We are achieving a 60/40 glass ... from the engine room to just forward of amidships. The fiberglass baffles and the top of the tank also ... : 20’0” Draft: 5’0” Displ.: 102,000 lb. Fuel: 1,900 gal. Water: 270 gal. Engine ...

. European yachtsmen rarely spent the night aboard or cared to visit the engine room. Crew were packed ... are offered. A hatch in the exterior cockpit sole and a vertical ladder allow access to the engine ... access via a hatch in the engine room’s after bulkhead, which leads to the lazarette — it’s big enough ...

, and four people onboard. Fuel consumption was calculated by the electronic engine-monitoring system. Sound ... ’2” DISPL.: 85,000 lb. (dry) FUEL: 2,600 gal. WATER: 450 gal. TRANSOM DEADRISE: 13 degrees ENGINES ...

and I confess that I like the way the Brits think when it comes to engineering and production. It is my ... . The engine room is accessible from the transom door via the crew’s quarters or from a hatch in the afterdeck ... . While the 72’s engine room has full headroom, wing tanks outboard of the engines crowd things a bit ...

thing about boat design,” Martin said. “Things got a bit loud and Gil Wyland [S&S’s chief engineer ... was purchased by the National Association of Engine and Boat Manufacturers (NAEBM) in 1968 and led by designer ...

is that by the 1980s Bertram engineers had realized that what most call "deep" (20-plus degree transom deadrise) did not make sense on a 50-foot convertible. Bertram engineers compromised and melded a deep entry ... . In the 1980s, Bertram engineers were crunching numbers while most production builders were developing ...

four decades and with 4,200 boats built, the Viking design and engineering team has a rich library ... on the competition. Wilson and his peers in design and engineering spend time aboard as often as possible. “Sea time ... independently, which allows engineers to dial in the ideal trailing position and toe-in. At speed, the 76 ...

.) Engine electronic displays were located overhead on the underside of the fiberglass tower canopy. (I ... fuel system is virtually foolproof. Engines and generator draw from a single fiberglass main tank ... -conditioning. Here again, the optional backup Viking offers would be a wise choice. Main engine raw-water intakes ...

with its investment in product development. Today, Sea Ray’s PD&E (product development and engineering ...

boat's engine instruments were positioned overhead on the underside of the hardtop. While this works ... around the engines was good and auxiliary equipment appeared to be organized by folks that understand ... . The emergency de-watering system is an example-it is plumbed via a bypass from the engine's raw-water intakes ...