7 Results for "engine"
Filter by Boat Brand
- (+) View All
Filter by Engine Brand
Filter by Engine Type
October 3, 2007 - 3:11pmDual Cool
had a pair of Cummins QSC diesels of 533 hp each. The engine installation is clever, with a pair of powder-coated steel beams that serve as engine beds suspended between the fore and aft engineroom bulkheads. The more usual procedure is to bolt the engines to stringers integral with the hull ...
October 3, 2007 - 3:11pmSilverton 48 Convertible
and engineering. Silverton's demographics suggest these potential customers have owned at least four boats ... . Nonslip walking flats make moving about reasonably easy. Engines are mounted on vinyl-coated steel I-beams, which transmit the engine load to the bulkheads instead of the stringers. Bilges are finished ...
October 3, 2007 - 3:11pmSilverton 38 Convertible
frames are formed over wood, and bulkheads are plywood. Engines are mounted on steel foundation beams ... of the engines crowd things a bit. There are engine access and removal hatches in the saloon sole ... the engine compartment or via the lift-out fish/stowage box in the cockpit. The entire cockpit sole can ...
October 3, 2007 - 3:11pmSilverton 43 SportBridge
and move about the space on centerline, performing basic preflight checks on the engines and generator. The compartment is well lit and bilge areas are finished with gelcoat. The engines are mounted on powder ... . This arrangement is proven and makes sense from a production standpoint as it simplifies engine alignment. Some ...
October 3, 2007 - 3:11pmSilverton 39 Motor Yacht
the center of gravity. The builder offers a variety of gasoline and diesel engine options. While ... rpm. A 20-knot cruise would be important to me, so I would select these engines or the bigger ... to the engine space is through the saloon sole, and equipment removal hatches are provided in case major work ...
Your Online Source For All Things NauticalShop Online Now! >